Installation; Base Installation; Door Handle Installation; Door Position Adjustment - Conglom Transform QL087 Manuel De L'utilisateur

Installation

BASE INSTALLATION

A thorough inspection must be made before installation and any
damages or missing parts must be promptly reported . Do not proceed
with the installation . Do not dispose of packaging before you are
satisfied with your new utility sink.
1 . Unpack the unit and place the sink (D) on a blanket or cardboard
to protect the surface .
2 . Turn the cabinet (E) upside down onto the protective surface .
3 . Gently attach the cabinet base (C) onto its proper location . Using
the supplied base screws (BB), attach the base to the cabinet .
4 . Attach cabinet feet (B) to the base .
5 . Gently place the cabinet upright .
CAUTION:
Do not place side load onto feet when righting
the cabinet .
E
QL087
C
BB
B

DOOR HANDLE INSTALLATION

1 . Insert the door hand screws (AA) into the pre-drilled holes
on each door .
2 . Attach the door handles (A) and hand tighten the door
handle screws (AA) .
3 . Repeat on other door .
A

DOOR POSITION ADJUSTMENT

If the doors need to be repositioned, the hinges can be
adjusted to ensure a precise fit with the cabinet.
4 . The lateral adjustment
screw adjusts the door
left or right .
5 . The horizontal
adjustment screw
adjusts the door forward
or backward .
6 . The vertical adjustment
screw adjusts the door
up or down .
6
AA
1
2
3