M-system MSPK950IX Notice D'emploi page 29

English
6. Fix the body with two safety screws 5a.
Note: The two safety vents are positioned on the back
casing, with diameter of 6mm
Oil collector cleaning
The motor of certain models is equipped with a oil
collector 6a
If the oil collector is 2/3, full it must be emptied and
cleaned.
Slide the oil collector out of its fixture (arrow (1) and
remove it from the motor (arrow (2).
Empty the collector, clean it with detergent and refit it in
reversed sequence again at the motor.
Figures are for illustration purposes only
The shape and equipment for your hood can differ from the illustrations.
fi90520
All manuals and user guides at all-guides.com
Operating instructions / users manual Cooker Hoods
16. General Installation Instruction
Chimney Cooker hoods
5
6
6a
1
13
GB
5a
2
Figures are for illustration purposes only.