Remote Control - Yamaha HTR-5840 Mode D'emploi

CONTROLS AND FUNCTIONS

Remote control

This section describes the function of each control on the
remote control used to control this unit. To operate other
components, see "REMOTE CONTROL FEATURES" on
page 57.
1
POWER POWER
TV AV
CD MD/CD-R
2
DVD DTV/CBL
REC
DISC SKIP
FREQ/TEXT
MODE PTY SEEK
TV VOL TV CH
TV MUTE TV INPUT
STEREO MUSIC
1 2
3
STANDARD SELECT
5 6
A SPEAKERS B
4
9 0
LEVEL
5
TITLE
6
7
RETURN
PRESET/CH
6
8
SYSTEM
STANDBY POWER
9
TUNER SLEEP
0
VCR V-AUX
MULTI CH IN
A
AUDIO
CODE SET
B
EON
AMP
C
START
D
VOLUME
E
MUTE
ENTERTAIN MOVIE
3 4
EXTD SUR. DIRECT ST.
7 8
F
NIGHT STRAIGHT
10
ENT.
G
SET MENU
MENU
H
ENTER
A/B/C/D/E
DISPLAY
1 Infrared window
Outputs infrared control signals. Aim this window at the
component you want to operate.
2 Input selector buttons
Select the input source and change the control area.
3 Sound field program/numeric buttons
Use to select sound field programs.
Use numbers 1 through 8 to select preset stations when the
unit is in tuner mode.
Use SELECT to playback 2-channel sources in surround
(see page 29).
Use EXTD SUR. to switch between 5.1 or 6.1-channel
playback of multi-channel software (see page 28).
Use DIRECT ST. to playback 2-channel sources in high
fidelity sound (see page 30).
4 SPEAKERS A/B
I
Use to turn on or off the set of front speakers connected to
the A and/or B terminals on the rear panel each time the
corresponding button is pressed.
5 LEVEL
Selects the speaker channel to be adjusted and sets the
level.
6 Cursor buttons u / d / j / i / ENTER
Use to select and adjust sound field program parameters or
SET MENU items.
Press i to select a preset station group (A to E) when the
unit is in tuner mode.
Press u / d to select a preset station number (1 to 8)
when the unit is in tuner mode.
7 RETURN
Returns to the previous menu level when adjusting the
SET MENU parameters.
8 STANDBY
Sets this unit in the standby mode.
9 SYSTEM POWER
Turns on the power of this unit.
0 SLEEP
Sets the sleep timer.
A MULTI CH IN
Selects multi-channel input when using an external
decoder (etc.).
B CODE SET
Use to set up remote control codes (see page 58).
C AMP
Selects the AMP mode. You must select the AMP mode to
control the main unit.