Vaisala HMDW110 Serie Guide Rapide page 7

HMW110/112 Installation
Medium size crosshead screwdriver (Pozidriv) for cover
n
screws.
Small slotted screwdriver for screw terminals.
n
Two installation screws: Ø ≤ 3.5 mm, head Ø ≤ 8 mm.
n
Depending on the wall material and screw type, you may
n
need a drill and a suitable drill bit to make installation holes
for screws.
Tools for cutting and stripping wires.
n
19 mm open-end wrench for tightening the cable gland.
n
1. Open the transmitter cover and use two screws (not included) to attach
the transmitter to the wall. The probe and cable gland should point down.
EN
DE
FR
JA
ZH
RU
5