Maintenance Schedule - AL-KO solo R7-62.5 Mode D'emploi

Maintenance
8. Turn off the water and disconnect the hose
(24/1).
9. Start the engine again and allow the mower
mechanism to run for a few more minutes in
order to fling out the water.
10. Clean the grass catcher (see chapter 8.1
"Cleaning the grass catcher", page 44).
9 MAINTENANCE
WARNING!
Dangers during maintenance!
During all maintenance work:
■
Switch off the engine and remove
the ignition key.
■
Remove the spark plug connector.
■
Protective devices removed for
maintenance must be reinstalled af-
terwards.
■
DANGER OF BURNS: Do not work
on the ride-on mower until it has
cooled down. The engine, transmis-
sion and silencer get very hot!
■
DANGER OF LACERATIONS:
When working on the cutters, pay at-
tention to the sharp blades. In mow-
ers with more than one blade, mov-
ing one cutter can cause the other to
move as well.
■
Parts are only allowed to be re-
newed by genuine spare parts.
■
If in doubt, always visit a specialist
workshop or contact the manufactur-
er.
Activity
Checking the engine oil lev-
el
)*
Changing the engine oil
Cleaning the air filter
Replacing the air filter
Checking the spark plug
Checking the brake (test
braking on a straight path)
478078_d
Before
each use
X
)*
)*
)*
)*
X
9.1

Maintenance schedule

The following jobs are allowed to be carried out
by the user independently. All other maintenance,
service and repair work must be carried out in an
authorised service workshop.
In addition, please also comply with the recom-
mended annual lubrication tasks as indicated in
the lubrication plan.
After After the
each use first 5
hours
X
Every 25 Every 50
operating operating
hours hours
X
X
X
Each
time be-
fore put-
ting into
storage
X
45