Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
9.2 - Minimum power heating mode
With the appliance on in fan mode, press key
power . The LED
9.3 - Maximum power heating mode
With the appliance on in minimum power mode, press key
maximum heating power . In addition to the LED
up the LED
If one of the heating modes has been activated, press the ON/OFF
button to turn the appliance off, the display starts the 30 sec-
onds countdown after which the appliance turns off.
9.4 - ECO mode (temperature setting)
Ambient temperature is shown on the display when the appliance is turned on.
When the appliance is on, pressing button
flash and the set temperature value to be shown.
Within 5 seconds, press buttons
18°C÷45°C - 1°C variations). To confirm the setting, please wait 5 seconds; the display
goes back to show ambient temperature.
If the set temperature is slightly higher than the ambient one (+1÷2°C), the minimum
power heating function activates automatically (
If the set temperature is greatly higher than the ambient one (>3°C), the maximum
power heating function activates automatically (
If the set temperature is lower than ambient temperature, the appliance ends heating
function, after 30 seconds the fan stops (
stops (LED
The set temperature can be changed at any moment during functioning.
EN - 18
lights up on the appliance display.
together ).
too (
flashing).
to activate the minimum heating
, on the appliance display lights
will cause the temperature value to
and
to set the desired temperature (range:
on).
LEDs turned on).
LEDs flashing) and flap oscillation
twice to activate the
Publicité
Table des Matières
