Connecting The Unit - EMS Hu-Friedy PIEZON 150 Mode D'emploi

Connecting the unit

Always check that the unit is installed in a safe and stable position. A possible fall may suddenly pull
on the cord and the handpiece, hurting the patient and the user, and damaging the unit.
Check that the rated voltage of the power supply corresponds to the local line voltage to prevent
damaging the unit.
Use the unit only in a FI protected mains supply (FI = Residual current protection).
For USA or Canada: connect only to a Hospital Grade outlet.
Connect the unit to a water supply with the original Hu-Friedy & EMS water hose supplied with your product.
It is recommended to use an independent water supply..
6
FB-569_HS_2014_10_Notice_PIEZON 150_250.indd 6
30 VDC
7/3/2015 1:53:06 PM