Publicité
2.6 Onboard Headers and Connectors
Serial ATA3 Connectors
(SATA3_1: see p.2, No. 11)
(SATA3_2: see p.2, No. 10)
(SATA3_3: see p.2, No. 12)
(SATA3_4: see p.2, No. 9)
(SATA3_5: see p.2, No. 15)
(SATA3_6: see p.2, No. 13)
(SATA3_7: see p.2, No. 14)
USB 2.0 Headers
(9-pin USB_11_12)
(see p.2 No. 24)
(9-pin USB_13_14)
(see p.2 No. 23)
(9-pin USB_15_16)
(see p.2 No. 22)
USB 3.0 Header
(19-pin USB3_9_10)
(see p.2, No. 8)
22
Onboard headers and connectors are NOT jumpers. Do NOT place
jumper caps over these headers and connectors. Placing jumper caps
over the headers and connectors will cause permanent damage of the
motherboard!
SATA3_5
USB_PWR
P-12
P+12
1
P+11
P-11
USB_PWR
USB_PWR
P-14
P+14
1
P+13
P-13
USB_PWR
USB_PWR
P-16
P+16
1
P+15
P-15
USB_PWR
Vbus
IntA_PA_SSRX-
IntA_PA_SSRX+
GND
IntA_PA_SSTX-
IntA_PA_SSTX+
GND
IntA_PA_D-
IntA_PA_D+
1
These seven Serial ATA3
(SATA3) connectors support
SATA data cables for internal
storage devices. The current
SATA3 interface allows up to
6.0 Gb/s data transfer rate.
Besides two default USB 2.0
ports on the I/O panel, there
GND
DUMMY
are three USB 2.0 headers on
this motherboard. Each USB 2.0
GND
header can support two USB
2.0 ports.
GND
DUMMY
GND
GND
DUMMY
GND
Besides six default USB 3.0
Vbus
Vbus
ports on the I/O panel, there is
IntA_PB_SSRX-
IntA_PB_SSRX+
one USB 3.0 header on this
GND
IntA_PB_SSTX-
motherboard. This USB 3.0
IntA_PB_SSTX+
header can support two USB 3.0
GND
IntA_PB_D-
ports.
IntA_PB_D+
Dummy
Publicité
