3M Peltor ComTac VI NIB MT20H682 N Serie Mode D'emploi page 22

Repeat step 2.7 for the other guide, and fully attach the left cup to the headband. At this stage the earcups should look like in figure 2.7-c.
(2.7-c)
2.8 Attach the right earcup to the headband as shown in figure 2.8-a and 2.8-b. Force will be required. NOTE: Push or pull the earcup
arm guide on the earcup as shown in figure 2.6. or 2.8. Choose the method that suits you the best. If you have trouble attaching, the
use of a gripping tool may be helpful.
(2.8-a)
Repeat step 2.8 for the other guide, and fully attach the right earcup. Upon successful installment the earcups should look like in
figure 2.8-c and 2.8-d.
(2.8-c)
(2.8-b) (2.8-b)
16
EN