Publicité
Les langues disponibles
Les langues disponibles
b) Turning on/off
• With the headset off, push and hold the call button (1) for 3 seconds until the blue
LED flashes 3 x and an acoustic signal sounds. The headset is on.
• With the headset on, push and hold the call button (1) for 3 seconds until the blue
LED flashes 3 x and an acoustic signal sounds. The headset is off.
c) Pairing the headset
• The headset must be turned off before pairing.
• Push and hold the call button (1) for 7 seconds until the blue LED lights up
permanently and an acoustic signal sounds. The headset is now in pairing mode.
• Activate the Bluetooth
function on your mobile device (e.g. smartphone) and start
®
the search function for Bluetooth
device for more information).
• Select the headset "BH802" from the list of found devices.
Some mobile telephones require a separate connection to be established
after pairing. Read the user manual of your mobile device for more
information.
• When pairing is successful, the headset switches to standby mode and the blue
LED blinks 1 x every 7 seconds. When connected to a mobile phone, the name of
the headset appears in the menu that shows currently paired Bluetooth
If the headset cannot be paired, check whether the rechargeable battery is
charged and/or whether the headset is on and paired. Also check whether
the Bluetooth
function on your mobile device is activated and whether the
®
headset is within transmission range (10 meters).
If no connection can be established in a longer period of time, the headset
turns off the pairing function. The headset must be restarted before
operation.
With some mobile devices, you may need to pair the devices again when
the headset is restarted.
d) Call function
• Making a call: Use your mobile telephone as usual. The sound will be transmitted
automatically to the headset when headset and mobile phone are paired.
• Accepting a call: Push the call button (1) or corresponding button on your mobile
phone to accept an incoming call.
• End a call: Push the call button or corresponding button on your mobile phone.
• Rejecting a call: Push and hold the call button for 2 seconds until the headset beeps
to reject an incoming call.
• Voice input: You can direct call a person by speaking their name into the microphone.
Your mobile phone must be set up for this function and you must prerecord all
respective voice actions. Activate voice recognition on your mobile device. Push
the call button while no call is being made. The headset beeps. Say the name of the
person you wish to call, loudly and clearly.
• Redialing: If your mobile phone supports the redial function with this device, press
the call button twice. The headset beeps.
• Setting the volume: Use the volume control on your mobile phone to increase/
decrease the volume.
• Switching between your mobile phone and the headset: During a call, push and hold
the call button for 2 seconds until the headset beeps. The call is switched from the
headset to your mobile phone (and back when you repeat the step).
devices (read the user manual of your mobile
®
Maintenance and cleaning
Do not use any aggressive cleaning agents, rubbing alcohol or other chemical
solutions as they can cause damage to the housing and malfunctioning.
• Disconnect the product from all connected devices before cleaning.
• Never submerge the product in water.
• There are no components located inside the product you need to maintain. Never
open/dismantle the product.
• To clean the product, a dry, soft and clean cloth is sufficient. Do not apply too much
pressure to the housing to prevent scratching.
Declaration of Conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau hereby declares that
this product conforms to the 2014/53/EU directive.
Click on the following link to read the full text of the EU declaration of
conformity: www.conrad.com/downloads
Select a language by clicking on a flag symbol and enter the product order
number in the search box. You can then download the EU declaration of
conformity in PDF format.
devices.
®
Disposal
a) Product
Electronic devices are recyclable waste and must not be disposed of in the
household waste.
At the end of its service life, dispose of the product according to the
relevant statutory regulations.
The built-in rechargeable battery must be disposed of by a specialist.
b) (Rechargeable) batteries
You as the end user are required by law (Battery Ordinance) to return all used batteries/
rechargeable batteries. Disposing of them in the household waste is prohibited.
Contaminated (rechargeable) batteries are labelled with this symbol to
indicate that disposal in the domestic waste is forbidden. The designations
for the heavy metals involved are: Cd = Cadmium, Hg = Mercury, Pb = Lead
(name on (rechargeable) batteries, e.g. below the trash icon on the left).
Used (rechargeable) batteries can be returned to collection points in your
municipality, our stores or wherever (rechargeable) batteries are sold.
You thus fulfil your statutory obligations and contribute to the protection of the
environment.
Technical data
Input voltage / current........................5 V/DC, max. 52 mA
Internal rechargeable battery........... 3.7 V/DC lithium polymer rechargeable battery,
Charging connection ..........................Low-voltage plug
Bluetooth
version ..............................3.0 + 2.1
®
Bluetooth
profile ...............................HFP 1.5, HSP 1.1
®
Call time ................................................up to 3 hours
Standby time ........................................up to 72 hours
Transmission frequency .....................2.402 – 2.48 GHz
Transmission power ...........................max. 4 dBm
Bluetooth
transmission range ........up to 10 meters
®
Impedance ...........................................32 ohm
Operating conditions ..........................-10 to +50 °C, 0 – 85 % RH
Storage conditions..............................-10 to +50 °C, 0 – 90 % RH
USB charging cable length ...............approx. 17 cm
Dimensions (W x H x D)......................59 x 14 x 22 mm
Weight ...................................................approx. 7 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent the
technical status at the time of printing.
© Copyright 2019 by Conrad Electronic SE.
65 mAh
V3_0219_02-HK
Publicité
