Table Des Matières; Introduction - Husqvarna PAB1100 Manuel D'utilisation

Introduction..................................................................... 2
Safety..............................................................................3
Assembly........................................................................ 6
Operation........................................................................ 8
Product description
We have a policy of continuous product development
and therefore reserve the right to modify the design and
appearance of the products without prior notice.
Note: This manual cover battery operated power units.
Attachment overview
11
10
12
1. Bevel gear
2. Chain lubrication adjustment screw
3. Shaft (1100 mm)
4. Harness support hook (24 mm)
5. Protective guard for saw chain
6. Bar nut
7. Chain tensioning screw
8. Saw chain
9. Guide bar
10. Chain oil tank
11. Filling with chain oil
12. Operator's manual
13. Transport guard
2
Contents

Introduction

2
8
7
15
Maintenance................................................................... 9
Technical data.............................................................. 15
Accessories.................................................................. 15
Intended use
WARNING: This attachment may only be
used together with the intended product, see
the accessory chapter in the Operator's
Manual of the product.
This attachment is only designed for cutting branches
and twigs.
11
9
2
1
3
6
5
13
16
14. Combination wrench
15. Harness
16. Torx wrench
17. Hand guard
18. Harness support hook (1")
Symbols on the attachment and on the
power unit
Careless or incorrect use of this product can
result in serious or fatal injury to the operator
or others.
18
4
17
14
1358 - 001 - 18.10.2019