Troubleshooting - Atag OX6411F Mode D'emploi

TROUBLESHOOTING

If you have problems with your oven, try the solutions suggested
below. They may save you the time and inconvenience of an
unnecessary service call.
What should I do if the oven doesn't heat up?
Check to see if one of the following actions resolves the issue:
• The oven may not be switched on. Switch the oven on.
• The clock may not be set. Set the clock (see section 'Setting the
clock').
• Check to see if the required settings have been applied.
• A household fuse may have blown or a circuit breaker may have
tripped. Replace the fuses or reset the circuit. If this happens
repeatedly, call an authorised electrician.
What should I do if, even though the oven function and temperature
have been set, the oven does not heat up?
There may be problems with the internal electrical connections. Call
your local service centre.
What should I do if an error code appears and the oven does not
heat up?
There is a fault in the internal electrical circuit connection. Call your
local service centre.
What should I do if the time display is blinking?
There was a power failure. Set the clock (see section 'Setting the clock').
What should I do if the oven light doesn't illuminate?
The oven light is faulty. Replace the oven light bulb (see section
'Changing the lamp').
What should I do if the oven's fan is running without having been set?
Following use, the oven's fan runs until the oven has cooled down. Call
your local service centre if the fan continues to run after the oven has
cooled down.
EN 47