Atag OX6411F Mode D'emploi page 189

CLEANING AND CARE
Door attaching
Repeat steps 1 and 2 in reverse order.
Door glass removal
The oven door is equipped with three sheets of glass placed against
each other. These sheets can be removed for cleaning.
1
Remove the two screws on the left and right sides of the
door.
2
Detach the covering and remove glass 1 from the door.
3
Lift glass 2 and remove the two holder glass rubbers
from the top of the sheet. Clean the sheets with warm
water or washing-up liquid and polish dry them with a
soft clean cloth.
Door glass attaching
Repeat steps 1, 2 and 3 in reverse order.
• When assembling the inner glass 1, put printing to the lower direction.
Attention: The glass may break if you use excessive force
especially at the edges of the front sheet.
Warning:
• Whenever the door is separated from the oven, the clips should be
flipped open.
• Do not use harsh abrasive cleaners or metal scrapers to clean the
oven door; they can scratch the surface, which may cause the
glass to shatter.
• When the door is mounted, removing some of the parts (the door
glass or some other part) from the door may result in injury.
EN 43