Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4
OPERATION
Button
Function
Turns the suction motor on and off at the last
A
speed used.
B
Decrease the working speed.
C
Increase the working speed.
Activates intensive speed from any other
D
speed even with the motor off. This speed is
timed to run for 10 minutes, after which the
system returns to the previous speed. Suitable
to deal with maximum cooking fumes.
E
Activates the motor at a speed that allows
extraction of 100m3 / h for 10 minutes every
hour. After 24 hours, this function stops.
When the filter alarm is on, press the
button for approximately 3 seconds to
reset the alarm. These signs are visible only
when the engine is off.
F
Activates automatic shutdown after 30'. Suit-
able to complete elimination of residual
odours. Can be activated from any position,
and is turned off by pressing the button or
switching the motor off.
G
Turns the main lighting system on and off.
Decreases or increases the brightness
H
by a long press.
A
B
C
D
Control panel
E
F
G
H
Display
Displays the speed set
Displays HI and the bottom right hand spot
flashes once a second.
Displays 24 and the bottom right hand spot
flashes, while the motor is turned on.On
completing the procedure the previous
indicator is turned off:
FF ou FG
indicates that the metal
grease filters
need washing. The alarm is triggered
after the Hood has been in operation
for 100 hours.
EF indicates that the activated charcoal
filter
needs
changing
metal
grease
washing.
The alarm is triggered
after the Hood has been in operation
for 200 hours.
These operations are only possible when
the motor and the lighting is turned off.
Alternately displays the working speed and
the time remaining before the hood turns
off. The bottom right hand spot flashes.
GB
and
the
filters
need
9
Publicité
Table des Matières
