Panasonic ER-GB96 Manuel D'utilisation page 11

Removing and mounting the attachments
Take care not to injure hands, etc., with the blade when
removing or mounting the attachment.
►Mounting the attachment
Mount the attachment to the
main body until it clicks.
If the attachment is not
attached correctly, it may shift
and end up cutting too much
during use.
►Removing the attachment
Hold the main body securely and
remove the attachment from the
main body.
Comb attachment
• Actual hair length will be a little longer than the height you set.
• Setting of 10.5 mm (27/64˝ ) or 20.5 mm (13/16˝ ) is
unavailable.
• Hair trimmings may collect inside the attachment when a
large volume of beard is cut, so discard hair trimmings after
each use.
►How to use the comb attachment
Mount the desired attachment and turn the dial and
adjust the trimming height indication mark to the
desired height.
ER-GB96中南美 v10.indb 11
Comb attachment [
click
Indicator
Trimming
mm 1 1.5 2 2.5 3 3.5 4
height
(mm)
inch 1/32 1/16 5/64 3/32 1/8 9/64 5/32 11/64 3/16 7/32
(estimate)
Indicator
Trimming
mm 6 6.5 7 7.5 8 8.5 9
height
(mm)
inch 15/64 1/4 9/32 19/64 5/16 11/32 23/64 3/8 13/32
(estimate)
Comb attachment [
Indicator
Trimming
mm 11 11.5 12 12.5 13 13.5 14 14.5 15 15.5
height
(mm)
inch 7/16 29/64 15/32 1/2 33/64 17/32 9/16 37/64 19/32 39/64
(estimate)
Indicator
Trimming
mm 16 16.5 17 17.5 18 18.5 19 19.5 20
height
(mm)
inch 5/8 21/32 43/64 11/16 23/32 47/64 3/4 49/64 51/64
(estimate)
C
]
1 • 2 • 3 • 4 • 5 •
4.5 5 5.5
6 • 7 • 8 • 9 • 10
9.5 10
]
11 • 12 • 13 • 14 • 15 •
16 • 17 • 18 • 19 • 20
C
C
11
18/5/9 上午8:56