Lincoln PowerLuber 1880 Mode D'emploi page 6

1880 Grease gun
Display
Control
Button
Battery
5852 or 251-10124-7
coupler
Fig. 1
Hose
LED light
Bulk
valve
Vent valve
Support
Hose holder
6
Inspection
Visually inspect for damaged, loose or miss-
ing parts. If equipment is worn or damaged,
remove from service. Contact an authorized
service center for damage assessment or
repair.
Operation
Speed selection
Pressing button 2 switches the tool between
high and low pump speed. The letter "L" or
"H" will be displayed on the screen.
High delivers 5.5 ounces (0,162 l) per
minute at 1,000 psi (68 bar) back pressure.
Low delivers 3.5 oz. (0, 103 l) per minute
at 1,000 psi (68 bar) back pressure.
LCD display and LED
light
• Button number 1 turns on/off the LED
• Button number 1 turns on display
• The tool's trigger also turns on the LED
and display
• The LCD and display will turn off after 30
seconds.
L
OZ
1 2
! Notice
Grease meter is very accurate and
does not show output if prime is lost.
Change unit of measure to ounces
or grams by holding button "1" for 15
seconds.
Fig. 2