Allmand NIGHT-LITE GR Série Manuel D'utilisation page 27

1.1 Trailers 10,000 Pounds (4536 kg) GVWR or less
(1) Locate the statement "The weight of cargo should
never exceed XXX kg or XXX lbs." on your vehicle's
placard.
(2) This figure equals the available amount of cargo and
luggage load capacity.
(3) Determine the combined weight of luggage and cargo
being loaded on the vehicle. That weight may not safely
exceed the available cargo and luggage load capacity.
1.2 Trailers over 10,000 Pounds (4536 kg) GVWR
(Note: These trailers are not required to have a tire
information placard on the vehicle.)
(1) Determine the empty weight of your trailer by
weighing the trailer using a public scale or other means.
This step does not have to be repeated.
(2) Locate the GWVR of the trailer on your trailer's VIN
(Certification) label.
(3) Subtract the empty weight of your trailer from the
GVWR stated on the VIN label. That weight is the
maximum available cargo capacity of the trailer and may
not be safety exceeded.
2. Steps for Determining Correct Load
Limit—Tow Vehicle
(1) Locate the statement "The combined weight of
occupants and cargo should never exceed XXX kg or
XXX lbs." on your vehicle's placard.
(2) Determine the combined weight of the driver and
passengers that will be riding in your vehicle.
(3) Subtract the combined weight of the driver and
passengers from XXX kg or XXX lbs.
(4) The resulting figure equals the available amount of
cargo and luggage load capacity. For example, if the
''XXX'' amount equals 1400 lbs. and there will be five 150
lb passengers in your vehicle, the amount of available
cargo and luggage load capacity is 650 lbs. (1400–750 (5
× 150) = 650 lbs.)
(5) Determine the combined weight of luggage and cargo
being loaded on the vehicle. That weight may not safely
exceed the available cargo and luggage load capacity
calculated in Step 4.
(6) If your vehicle will be towing a trailer, load from your
trailer will be transferred to your vehicle. Consult the
tow vehicle's manual to determine how this reduces the
available cargo and luggage load capacity of your vehicle.
3.Glossary of Tire Terminology
Accessory weight means the combined weight (in
excess of those standard items which may be replaced)
of automatic transmission, power steering, power brakes,
power windows, power seats, radio, and heater, to the
extent that these items are available as factory-installed
equipment (whether installed or not).
Bead means the part of the tire that is made of steel
wires, wrapped or reinforced by ply cords and that is
shaped to fit the rim.
Bead separation means a breakdown of the bond
between components in the bead.
Bias ply tire means a pneumatic tire in which the ply
cords that extend to the beads are laid at alternate angles
substantially less than 90 degrees to the centerline of the
tread.
Carcass means the tire structure, except tread and
sidewall rubber which, when inflated, bears the load.
Chunking means the breaking away of pieces of the
tread or sidewall.
Cord means the strands forming the plies in the tire.
Cord separation means the parting of cords from
adjacent rubber compounds.
Cracking means any parting within the tread, sidewall, or
inner liner of the tire extending to cord material.
Curb weight means the weight of a motor vehicle with
standard equipment including the maximum capacity of
fuel, oil, and coolant, and, if so equipped, air conditioning
and additional weight optional engine.
Cold inflation pressure means the tire pressure when
the vehicle hasn't been driven for at least three hours.
Extra load tire means a tire designed to operate at higher
loads and higher inflation pressure than the corresponding
standard tire.
Groove means the space between two adjacent tread
ribs.
Gross Axle Weight Rating or GAWR means the value
specified by the vehicle manufacturer as the load-carrying
capacity of a single axle system, as measured at the tire-
ground interfaces.
Gross vehicle weight rating or GVWR means the value
specified by the manufacturer as the loaded weight of a
single vehicle.
Hitch Weight means the downward force exerted on the
hitch ball by the trailer coupler.
Innerliner means the layer(s) forming the inside surface
of a tubeless tire that contains the inflating medium within
the tire.
Innerliner separation means the parting of the innerliner
from cord material in the carcass.
Light truck (LT) tire means a tire designated by its
manufacturer as primarily intended for use on lightweight
trucks or multipurpose passenger vehicles.
Load rating means the maximum load that a tire is rated
to carry for a given inflation pressure.
Maximum load rating means the load rating for a tire at
the maximum permissible inflation pressure for that tire.
Maximum permissible inflation pressure means the
maximum cold inflation pressure to which a tire may be
inflated.
Maximum loaded vehicle weight means the sum of
— (a) Curb weight; (b) Accessory weight; (c) Vehicle
capacity weight; and (d) Production options weight.
Measuring rim means the rim on which a tire is fitted for
physical dimension requirements.
en
27
English