Installation; Preparation - Conglom QL029K Manuel De L'utilisateur

Installation

PREPARATION

- Unpack all components and place them on a blanket or cardboard to protect them .
- Install wooden dowels (I) and cam lock pins (K) in their appropriate locations on all cabinet and base panels. It is best to install
the dowels (I) into the edges of the panels (A4) to (A8). Cam lock pins must be installed into the small holes of the flat faces of
cabinet panels (A1), (A4) and (A5) as shown below.
Dowel (I)
Hinge Bracket
Installed
Cam Lock Pin (K)
QL029K
A6
Bottom Panel
A4 and A5
Side Panels
A7 and A8
Rear Braces
Fig . 1
6
Door Hinge
Installed
A2 and A3
Front Door
A1
Front Panel