HumanTechnik CM-1 Mode D'emploi page 36

Meeting "around" a table
1. Set your hearing aid to "T" or "MT" in order to transmit sound information directly to
the T-coil in your hearing aid via the teleloop, or connect a headset to a CM-1 receiver.
2. Slide the mode selector switch to the Zoom position.
3. Position your CM-1 transmitter as close as possible to the speaker, whereby the
device's microphone unit should be pointing as directly as possible towards the
speaker.
4. Switch the CM-1 transmitter and CM-1 receiver on at the on/off switch.
5. Adjust the speech volume to a comfortable level by setting the volume controller on
your CM-1 receiver to an appropriate level.
36 English
You are taking part in the meeting shown.
The other people are speaking at different
levels.
Use the "Zoom" transmission mode to reduce
disruptive sounds from behind perceptibly and,
at the same time, to amplify speech in front of
you.