HumanTechnik CM-1 Mode D'emploi page 30

No. Control feature Function and application CM-1 transmitter
3 Mode
selector switch
4 On/off switch
5 Audio input
socket (LINE)
6 Stand
30 English
Switch Super Zoom
setting
Zoom
Omni
Switch On
setting
Off
Facility for connecting the CM-1 transmitter directly
to your television or music system.
Use the audio cable supplied.
Fould-out stand
Dialogue: audibly reduces disrup-
tive sounds from the sides and from
behind. When the device is switched
on, the change to this switch position
is indicated acoustically by three sig-
nal pulses.
Meeting: audibly reduces disrup-
tive sounds from behind and, at the
same time, amplifies signals from in
front. When the device is switched
on, the change to this switch position
is indicated acoustically by two signal
pulses.
Presentation: amplifies the signals
from all directions. When the device
is switched on, the change to this
switch position is indicated acousti-
cally by a signal pulse.
Push the switch up to activate your
CM-1 transmitter
Push the switch down to activate your
CM-1 transmitter