3.
Install the container cap and tight it enough to avoid leak-
age during the agitation.
4.
Agitate the container strongly in all ways (horizontal and
vertical), for approximately 30 seconds to remove the resi-
dues that are on the container internal walls.
5.
Take the container cap off and carefully pour the rinse wa-
ter into the spray tank.
6.
Keep holding the container over the spray tank opening
7.
for approximately 30 seconds to the last drop.
8.
Repeat this operation twice more. This way, you complete
the triple rinse.
9.
Make the plastic and metallic containers useless by pierc-
ing the container bottom with a pointed instrument. This
way, their labels are not damaged for identification pur-
poses.
14/68
6. Critical Safety and Health Information
WARNING!
Read carefully the chemicals manufacturer's
labels.
WARNING!
Wash hands and other parts of the body
that have touched chemicals before starting
to spray.
• After finishing the spray application, take a shower with
plenty of water and soap.
• Put on clean clothes.
NOTE: The clothing used during the application must be washed
separate from other clothes of ordinary use.
CAUTION!
Do not use the sprayer when tired, ill or under
the influence of alcohol or other drugs or
medication.
WARNING!
Use of individual protective clothing and
safety equipment is obligatory.
• Put 5 liters of water in a bucket and add the chemical product.
• Stir until it becomes an homogeneous mixture.
• Pour the solution into the tank while filling with water.
head protector
eyes protector
dust mask
long-sleeved shirt
apron
gloves
long pants
boot
15/68