Table Des Matières; Introduction; Specifications; Preparing The Product For Use - Jacto XP Serie Manuel Du Operateur

SUMMARY
1. Introduction
2. Specifications
3. Preparing the Product For Use
3.1. Unpacking
3.2. Installing the shaft
3.3. Installing the lever
3.4. Attaching the lance to the trigger valve (starting and stopping)
3.5. Tightening the fastening nut
3.6. Adjusting the shoulder strap
3.7. Tightening
3.8. Loosening
3.9. Storage
4. Operation of Product
4.1. Recommendations for use
4.1a. Best spraying practices
4.1b. Application
4.2. Calibration of manual knapsack sprayer
4.3. Choosing nozzle type
4.4. Influence of climatic conditions
4.5. Optional accessories for manual knapsack sprayers
4.6. Parts list
4.6a. XP 12/16/20
4.7. Disposal of waste products
5. Information Needed by User
5.1. Troubleshooting
5.2. Maintenance of the product
5.3. Cleaning the sprayer
5.4. Drainage
5.5. The consequences of improper service
5.5a. In case of clogged nozzle
5.6. Cylinder valve maintenance
5.7. Triple rinse of empty agrochemicals containers
6. Critical Safety and Health Information
7. Statement of Limited Warranty
2/68

1. Introduction

This manual contains information for the proper assembly, op-
3
eration and care of your sprayer. Carefully read and follow the
3
instructions contained in this manual before using your sprayer.
3
This equipment was designed for spraying plants protection
3
products approved by regulatory authorities to be used in knap-
sack sprayers.
3
4
4

2. Specifications

4
4
Model
4
Net weight
4
Full weight
5
Spray lance length
5
Hose length
5
Chemical tank
5
Capacity
5
Filling opening diameter
6
Material
6
Pump
8
Type
9
Working pressure
10
Nozzle installed
11
Material
12
12
SAFETY GUIDELINES - DEFINITIONS
12
It is important for you to read and understand this manual. The infor-
13
mation it contains relates to protecting YOUR SAFETY and PREVENTING
PROBLEMS. The symbols below are used to help you recognize this in-
13
formation.
13
DANGER!
13
13
Indicates an imminently hazardous situation which, if not avoid-
13
ed, will result in death or serious injury.
13
WARNING!
15
17
Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION!
Indicates a potentially hazardous situation which, if not avoided,
may result in minor or moderate injury.
Notice: Used without the safety alert symbol indicates a potentially haz-
ardous situation which, if not avoided, may result in property damage.
SAVE THESE INSTRUCTIONS: This manual contains important
safety instructions for the proper use and maintenance of this
product.

3. Preparing the Product For Use

3.1. Unpacking

Take out of the sprayer carton the following parts:
XP - 12/16/20
3.5 kg/ 3.6 kg/ 3.7 kg
15.5 kg/ 19.6 kg/ 23.7 kg
600 mm
1350 mm
Rod
Manual
12 l/ 16 l/ 20 l
100 mm
Polyethylene
NOTE: Minimum space needed for use, maintenance and repair
Piston
is 1,5 m².
5.9 bar
JD 12
CAUTION!
Polipropileno
Be careful when taking out the sprayer out
of the carton because the lever is loose and
can cause damage or personal injury. Note
that the agitator is loose inside the tank and
must be properly assembly.
NOTE: Carton can be discarded in recyclable waste.

3.2. Installing the shaft

• Insert the shaft (1) in the free opening on the tank base (on
the same side of the chamber).Fit the shaft lock (2).
Shaft lock (2)
Hose
Tank
Lance
Lever
Contents of the
plastic bag
Shaft
(1)
3/68