Introduction; Specifications; General Power Tool Safety Warnings; Work Area Safety - Jacto PJBc Manuel Du Operateur

1. Introduction

This manual contains information for the proper assembly, op-
eration and care of your sprayer. Carefully read and follow the
instructions contained in this manual before using your sprayer.
This equipment was designed for spraying plants protection
products approved by regulatory authorities to be used in knap-
sack sprayers.

2. Specifications

Model
Maximum dimensions (W x L x H)
Net weight
Gross weight
Spray lance length
Hose length
Chemical tank
Capacity
Residual volume
Filling opening diameter
Material
Pump
Type
Maximum pressure
Open flow
Nozzle installed
Battery
Type
Rated Voltage
Capacity
Recharge time
SAFETY GUIDELINES – DEFINITIONS
It is important for you to read and understand this manual. The infor-
mation it contains relates to protecting YOUR SAFETY and PREVENTING
PROBLEMS. The symbols below are used to help you recognize this in-
formation.
DANGER!
Indicates an imminently hazardous situation which, if not avoid-
ed, will result in death or serious injury.
WARNING!
Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION!
Indicates a potentially hazardous situation which, if not avoided,
may result in minor or moderate injury.
NOTE: Used without the safety alert symbol indicates a potentially haz-
ardous situation which, if not avoided, may result in property damage.
PJBc - 20/16/8
532 mm x 385 mm x 205 mm/
462 mm x 385 mm x 205 mm/
417 mm x 255 mm x 159 mm
4.0 kg/ 3.2 kg/ 2.4 kg
24.0 kg/ 19.2 kg/ 10.4 kg
600 mm/ 600 mm/ 350 mm
1350 mm/ 1350 mm/ 1650 mm
20 L/ 16 L/ 8 L
None
115 mm/ 115 mm/ 100 mm
Polyethylene
Diaphragm
60 psi (4.1 bar)
1.9 l/min
Blue adjustable cone
Lithium Ion, rechargeable
10.8 V d.c.
20 Wh (2200 mAh)
6 hours

3. General Power Tool Safety Warnings

WARNING!
Read all safety warnings and all instructions.
Failure to follow the warnings and instruc-
tions may result in electric shock, fire and/or
serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
The term "power tool" in the warnings refers to your mains-op-
erated (corded) power tool or battery-operated (cordless) pow-
er tool.

3.1. Work area safety

a. Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
b. Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust or
fumes.
c. Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.

3.2. Electrical safety

a. Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
b. Avoid body contact with earthed or grounded surfaces
such as pipes, radiators, ranges and refrigerators. There
is an increased risk of electric shock if your body is earthed or
grounded.
c. Do not expose power tools to rain or wet conditions. Wa-
ter entering a power tool will increase the risk of electric shock.
d. Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
e. When operating a power tool outdoors, use an extension
cord suitable for outdoor use. Use of a cord suitable for out-
door use reduces the risk of electric shock.
f. If operating a power tool in a damp location is unavoid-
able, use a ground fault circuit interrupter (GFCI) protect-
ed supply. Use of a GFCI reduces the risk of electric shock.

3.3. Personal Safety

a. Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention while oper-
ating power tools may result in serious personal injury.
.
3/67