Hisense RT641N4WFE Manuel page 44

. Use the Allen wrench(provided in the
8
plastic bag) and cross-shaped
screwdriver to loosen the screws and
remove the middle hinge-right.
9 . Change screw hole covers and screw .
on middle cover plate from left to right
(as shown in figure below).
Install middle hinge-left (in the plastic
10.
bag) .
Transfer the upper door to the
appropriate position. Secure the
door level, make the middle hinge axis
into the lower hole of the upper door.
Install the hinge② (provided in the
plastic bag)by screws①. Please hold the
upper door by hand when installing.
11.Take out the connector from the hole
on the top left side.Then connect it with
the door switch on the upper hinge
cover-left.
Electrical connector
①
Special flange screw
②
Upper hinge-left
①
②
Door switch
12.Install the upper hinge cover② on
the left corner by screw①.
①
Self-tapping screw
②
Upper hinge cover-left
13.Open the upper door and install the
door racks and then close it.
Note:
If your appliance has handle, you have
to reverse handle by follow instructions
below.
Lever part① and part④, then loose
screws②. Change handle③ to the right
side, then install screws②, part① and
part④ in turn.
①
②
③
①
Handle cover
②
Special screws
③ Handle
④ Screw hole cover
①
②
④
16