Hisense RT641N4WFE Manuel page 42

Re-assembling the freezer drawer
To reattach the drawer after you moved the
appliance to its final location, assemble the
parts in reverse order.
Installing the lower drawer
1. Push down the lower drawer to the
final position in the direction of the
arrow.
2. Put the tray on the drawer and
push it award and ensure the
tray's rollers on the freezer liner
(D)'s fillets.
3. Push the freezer door along the arrow and close it.
Reversing the door
The side at which the door opens can be
changed, from the right side (as supplied)
to the left side if required.
Warning!
When reversing the door, the appliance
must not be connected to the mains,
Ensure that the plug is removed from the
mains socket.
Tools you will need
Not provided
8mm socket wrench
Cross-shaped
screwdriver
Additional parts (in the plastic bag)
upper hinge-left hinge cover-left screw hole cover-right
middle hinge-left stop block-left*2
Allen Wrench(4mm)
●
Thin-blade
Putty knife
screwdriver
Monkey wrench 8mm wrench
Door stopper-left*2
14