Disposal Of The Old Device - LENCO SCD-580SI Guide D'utilisation

Masquer les pouces Voir aussi pour SCD-580SI:

Mode d'emploi (16 pages)

Table Des Matières

Table des Matières

Les langues disponibles

FLAT

CLASSIC

Due to the ErP Stage 2 requirements (see below) for power saving measures, a unit which is connected to the

mains power will switch itself to standby mode automatically if no music has been playing for over 15 minutes.

If your unit switches off regularly, this is no defect

Power supply adaptor (For EU only)

Power supply: DC 12V

Information

Manufacturers name or trade mark, commercial

registration and address

Model Identifier

Input voltage

Input AC frequency

Output voltage

Output current

Output Power

Average active efficiency

Efficiency at low load (10%)

No load Power consumption

GUARANTEE

Lenco offers service and warranty in accordance to European law, which means that in case of repairs (both during and after

the warranty period) you should contact your local dealer.

Important note: It is not possible to send products that need repairs to Lenco directly.

Important note: If this unit is opened or accessed by a non-official service center in any way, the warranty expires.

This device is not suitable for professional use. In case of professional use, all warranty obligations of the manufacturer will

be voided.

DISCLAIMER

Updates to Firmware and/or hardware components are made regularly. Therefore some of the instruction, specifications and

pictures in this documentation may differ slightly from your particular situation. All items described in this guide for

illustration purposes only and may not apply to particular situation. No legal right or entitlements may be obtained from the

description made in this manual.