Ga.Ma BARBER STYLE Mode D'emploi page 10

Fig.1
USE INSTRUCTIONS:
• Insert the desired attachment. This operation should always be done with the hair clipper turned off.
• Turn on the hair clipper by pressing the (O/I) button.
• Turn off the hair clipper by pressing the (O/I) button.
CUTTING LENGTH ADJUSTMENT:
The GM593 hair clipper offers the possibility of making finishing touches from 1.0 mm to 1.6 mm (if used
without any guide comb attached and using the adjustment lever) and performing classic hair cuts with the
following lengths: 1.5, 3, 4.5, 6, 10, 13, 16, 19, 22 e 25 mm.
ADJUSTABLE LEVER:
The lever for adjusting the cutting length is located on the left side of the body of the appliance (Fig. 2); this
lever lets you adjust the cutting height from 1.0 mm to 1.6 mm.
17
Fig.2
CLEANING AND MAINTENANCE:
A clean and properly lubricated hair clipper considerably improves its capacity and cutting precision.
DO NOT CLEAN ANY PART OF THE APPLIANCE UNDER RUNNING WATER.
CLEANING THE HEAD:
Before any cleaning operation, make sure that the appliance is properly turned off and disconnected from the
power outlet. Remove the accessory if it is inserted. Using the special brush supplied, remove any hair
residues between the blades and the back of the blade head.
NEVER DISASSEMBLE THE HEAD OF THE BLADE OR YOU WILL INVALIDATE THE WARRANTY ON THE
ENTIRE PRODUCT.
HOW AND WHEN TO LUBRICATE THE BLADE:
Before the first use we recommend lubricating the blade with a drop of the oil found in the package or with
any other lubricating oil (make sure that it is not too viscous).
Turn the hair clipper upside down (Fig.3) so that oil does not drip on the appliance. Lubricate the blade with a
18