Model Assembly - FMS ASW-17 Manuel D'utilisation

E
N

Model assembly

Installation of the vertical and horizontal stabilizers
1.The rudder snaps on to the vertical stabilizer with an
audible "click".
NOTE: Gently pull on the rudder to ensure that the
control surface has been properly installed.
2.Slide the horizontal stabilizer onto the vertical stabi-
lizer.
NOTE: Gently pull on the horizontal stabilizer to
ensure that the stabilizer has been properly installed.
Installation of the pushrods
1.With the rudder servo at its neutral position, connect
the pushrod to the rudder and secure using a hex-key.
4