Sharp XE-A203 Manuel D'instructions page 19

2. Text programming (Press
:
(1) Press key to enter text programming.
Immediately after displaying guidance message, the
current text data will be displayed.
(2) Enter an item name.
A maximum of 16 characters can be entered.
Please refer to "Guidance for text programming" on
page 13 for entering the item name.
When you start entering a character, the current
text data will be overwritten by new data.
P
Pressing the
the right and left respectively.
s
(3) Press the
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.
3. Unit price programming (Press
(1) Enter a unit price using numeric keys.
A maximum of 6 digits can be set.
Default setting is 0.
s
(2) Press the
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.
4. Entry type programming (Press
:
(1) Press key 3 times to display "PRESET".
:
Each time key is pressed, the display shows
"INHIBITED", "OPEN", "PRESET" and "OPEN &
PRESET" in this order.
Default setting is "OPEN".
When the unit price is changed from the default
setting ("0") in step 3, "OPEN & PRESET" will be
displayed first.
However, when the default setting is not changed,
"OPEN" will be displayed first.
s
(2) Press the
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.
s
to skip. / Press
@
and key moves the cursor to
key to register the item name.
s
key to register the unit price.
s
key to register the entry type.
1
QUICK START GUIDE
Part
A
to terminate.)
A
to skip. / Press
A
to skip. / Press
:
ENTER TEXT
DEPT.06
BOOK
BOOK
s
PRICE
to terminate.)
300
s
DEPT ENTRY TYPE
OPEN & PRESET
to terminate.)
: : :
s
SELECT OF TAX1
TAX1
2 3
Part Part
0.00
300
PRESET
YES
17