Publicité
Les langues disponibles
Les langues disponibles
6. Start the cooking process with the Start/
Stop button
31.
- The program symbol is permanently
displayed. The others are hidden.
- The hot air symbol
11.8 Interrupting the
cooking process
You can interrupt the cooking process at any
time, e.g. to check the degree of browning
or, in the case of more than one grid tray 18
to change the positions.
• Open the oven door 5 during the cook-
ing process.
The lighting is switched on, the fan and
the rotation function stop.
• To continue the cooking process, close
the oven door 5 again.
11.9 End of the cooking
process
• When the program has run to the end,
the display 2 shows OFF. The fan con-
tinues to run for approx. 20 seconds be-
fore the device is switched to standby
and 5 beeps are heard.
• You need a heat-resistant surface and a
plate or bowl (pre-heated if necessary).
• Remove the accessories with the ready-
to-eat food from the oven with oven
gloves or potholders.
• Hold down the release button 4 to the
right while lifting out the rotating bas-
ket 12 / rotary spit 10 with the han-
dle 11.
• Place the accessories on the heat-resist-
ant surface and transfer the food to the
prepared plate / bowl.
• Allow the device and accessories to
cool down before cleaning them.
23 flashes.
12. Cleaning
DANGER of burns!
Let the device 1 cool down before mov-
ing or cleaning it.
DANGER! Risk of electric
shock!
Pull out the mains plug 20 from the wall
socket before cleaning the hot air fryer 1.
The hot air fryer 1 must not be im-
mersed in water.
WARNING! Risk of material damage!
Do not clean using sharp objects or
abrasive cleaning agents.
Accessories
• Remove coarse food residues.
• Dismantle the accessories into their indi-
vidual components.
• Pay attention to the small locking screws 7.
• All accessories (except for the device 1
and the power cable 20) can be
cleaned in the dishwasher.
NOTE: you can also clean these parts by
hand with warm water and detergent. Then
rinse thoroughly with clean water.
• Soak burnt-in food leftovers beforehand.
• Let all parts dry completely before you
put them away or use the device again.
Housing
• Wipe the device 1 from the outside with
a damp cloth with a little mild detergent.
• Dry with a tea towel.
Interior
1. Clean the interior with a soft sponge, a
little water and mild detergent.
2. Wipe several times with a damp mi-
crofibre cloth, which you wash and
wring out from time to time.
3. Dry with a tea towel.
45
GB
Publicité
