Micro-Star International MS-7592 Mode D'emploi page 23

Cell Menu
use this menu to specify your settings for frequency/voltage control.
M-Flash
use this menu to read/ flash the BioS from storage drive (Fat/ Fat32 format
only).
Load Fail-Safe defaults
use this menu to load the BioS default values that are factory settings for system
operations.
Load optimized defaults
use this menu to load factory default settings into the BioS for stable system
performance operations.
Save & exit Setup
Save changes to CMoS and exit setup.
exit Without Saving
abandon all changes and exit setup.
Cell Menu
Current CPu / dRaM Frequency
these items show the current clocks of CPu, Memory and CPu-nB speed. Read-
only.
CPu Specifications
Press <enter> to enter the submenu, that shows the information of installed
CPu.
CPu technology Support
Press <enter> to enter the submenu, that shows the technologies that the in-
stalled CPu supported.
MS-7592
23