Micro-Star International MS-7592 Mode D'emploi page 13

ReaR PaneL
the rear panel provides the following connectors:
Mouse
Keyboard Serial Port
HaRdWaRe SetuP
this section provides instructions on CPu and memory installation, as well as
jumper settings on the mainboard. While doing the installation, be careful in hold-
ing the components and follow the installation procedures.
CPu & Cooler installation Procedures for LGa775
When you are installing the CPu, make sure that you install the cooler to prevent
overheating. if you do not have the CPu cooler, consult your dealer before turning
on the computer.
the pin-pad side of LGa 775 CPu
alignment Key
yellow triangle is the Pin 
indicator
Parallel Port
VGa Port
Lan
uSB Ports
the surface of LGa 775 CPu
Remember to apply some thermal
paste on it for better heat dispersion.
alignment Key
yellow triangle is the Pin 
indicator
MS-7592
Line-in
RS-out
Line-out CS-out
MiC SS-out
(optional)
3