Publicité
Les langues disponibles
Les langues disponibles
4.8. Connection:
.
In the off state, press
for 3s to enter the code configuration state (
flashing).
Press the Fan heater switch
on blower for 3s to enter the matching state (green light flashing),
once the network is successfully configured,
on the remote-control display flashes 3 times, at
the same time if the green light
flashes for 3 times indicating that the code matching is
successful.
If it fails,
will disapper after flashe for 6s, and the fan switch
green light will goes off after
20 seconds flashing, the network needs to be reconfigured.
will fast flash 4 times, when the radiator rack send data to controller.
Publicité
