Publicité
Les langues disponibles
Les langues disponibles
Connect the
§D§
the negative terminal of the car
battery.
Connect the
§C§
the vehicle electrical system so
that 12 V+ or 24 V+ are applied
when the ignition is switched
on.
Only use spade fuse connectors
for connecting the cable and then in-
sert the 3A spade fuses
spade fuse connectors
To safeguard the fuses for the wiring
loom professionally, the fuses must
be mounted between the end of the
wiring loom supplied and the
connector from the vehicle.
Connecting the loudspeaker cable to
the wiring loom
Connect the white/black
loudspeaker cable +
green/black
§E§
a cable connector
Connect the black loudspeaker
cable
to the green
§H§
loudspeaker cable
cable connector
cable (brown) to
cable (violet) to
5
into the
4
.
to the
§G§
connection using
9
.
using a
§F§
9
.
Car Kit Bluetooth
Connecting the radio*
The Car Kit can be connected to
car's audio system via the
phone-in/line-in port of your car
radio. The audio system's loud-
speakers are then used as a play-
back system for the Car Kit.
When connecting the Car Kit to the
4
radio's phone-in/line-in port, it may be
necessary to modify the Car Kit out-
puts to those of the radio phone-
in/line-in ports. You will find informa-
tion on this on the following
homepage:
www.siemens.com/
phoneinadapter
Mute
Please refer to the car radio manufac-
turer's instructions and check
whether there is a mute port available
for the radio.
The radio signal can be switched
automatically to mute during
phone calls. Connect the radio
mute control cable to the radio
muting control cable
mute input of the car radio.
* For vehicles with a phone-in/
line-in port.
The car radio is not included in the
standard delivery.
®
SIM (en)
to the
§A§
5
Publicité
