Publicité
Les langues disponibles
Les langues disponibles
16
Car Kit Bluetooth
Set the volume level
(in standby mode)
The electronics box volume level
is designed for the supplied
loudspeaker (maximum level
setting).
If you use the radio's speakers as
a playback device and the radio's
phone-in/line-in port is too sen-
sitive, you may reduce the
output level.
g/S
Press briefly.
g/
h
Select one of the
following symbols:
p
maximum output
level.
pV
level.
Press briefly to con-
c
firm the selection.
SOS call
(if no phone is connected and
the SOS icon is shown on the
display)
c
Press briefly.
®
SIM (en)
reduced output
Troubleshooting
Car Kit does not work
• Check the cable connections
• No operating voltage, check
the cable connection
• Phone not switched on or con-
nection to Car Kit not active
• Check fuses
• Operating voltage too high or
too low
Loud background noises at
recipient's end
• Microphone installed in the
air flow of the sunroof, win-
dow or ventilation system
• Distance between the micro-
phone/microphone cable to
phone < 50 cm
Poor talk and audio quality
• Car Kit outside the permitted
operating temperature
• Volume too low (adjust the
volume via phone/Car Kit!)
• Radio connection (phone-
in/line-in mode):
phone/Car Kit volume too
high (reduce the volume via
the phone/Car Kit and then if
necessary, increase it via the
radio, see also p. 16.)
Publicité
