Publicité
Les langues disponibles
Les langues disponibles
10
Car Kit Bluetooth
Functions
Valid for all functions unless
stated otherwise:
Press and hold: Car Kit
a
switches to standby
mode.
Press and hold (in
a
standby mode):
switches off the
Car Kit.
Press briefly: back one
a
level.
Switching on the Car Kit
• Switch on the Car Kit by turn-
ing the ignition or by pressing
and holding a.
• The Car Kit display shows the
phone which was used last.
g/h
Select entry.
c
Confirm selection.
If you do not make any selection,
after approx. 5 seconds, the
phone which was used last will
be connected provided it is with-
in range.
If this phone is not available, the
Car Kit switches to waiting
mode.
Press briefly: ends
a
standby mode.
®
SIM (en)
You can now select a phone or
connect a different phone, see
"Connecting an additional
phone", p. 9.
Adding numbers from the
mobile phone
Following each activation of the
Car Kit, the phone's Address-
book/Phonebook is added to the
Car Kit. This procedure may take
several minutes. A total of
1000 entries can be saved.
During transfer of the numbers,
the phonebook symbol flashes
in the Car Kit display. During this
time you can use the Car Kit to
dial numbers that have already
been transferred, or use number
selection.
Settings
h
Select which data are to be
transferred:
j []
j []
Press and hold.
SIM []
+
The Addressbook and
the Phonebook (SIM
card) of the phone are
used and saved on
the Car Kit, and
are updated
automatically.
Addessbook is used
and saved on the Car
Kit, and is updated
automatically.
Publicité
