Olimpia splendid Unico Boiler Instructions Pour L'installation, L'emploi Et L'entretien page 41

2
- Insert your arm into the pipe until the grid protrudes completely outwards.
16).
- Use hand shears to cut off any excess chain links.
WARNING: use exclusively the supplied grids, or grids with like characteristics.
hole having a diameter of 202 mm.
in.
- The power supply voltage and frequency values comply with those indicated on the data plate of the appliance.
conditioner (minimum cross-section of the cable must be 1.5 mm
- The appliance is powered exclusively through a socket that is compatible with the plug supplied.
WARNING: Any replacement of the power cable must be carried out solely by Olimpia Splendid technical support or by
WARNING: On the power supply line of the appliance there must be an adequate omnipolar disconnection device that
complies with the national installation regulations. It is, however, necessary to check that the electrical power supply is
delayed fuse or other devices with equivalent functions are recommended).
It is possible to proceed with the electrical connection using a cable embedded into the wall in a position as indicated in the
installation template (recommended connection for installing the appliance is to the upper part of the wall).
to the current national regulations.
To prevent the risk of an electric shock it is mandatory to switch off the main switch before performing the electrical connections
or any maintenance operation to the appliances.
- remove the cable
- insert the new cable following the same route
2 ).
2
41
UNICO BOILER