AirSep FreeStyle Manuel Du Patient page 197

[Read the Important Safety Rules section before operating this equipment.]
Nasal Cannula
A nasal cannula and tubing are used to deliver oxygen from the FreeStyle unit to the user. The tubing
is connected to the unit's oxygen outlet (See Figure 9).
AirSep recommends a nasal cannula with 7 ft (2.1 m) of tubing, AirSep Part No. CU002-1. Other
lengths of tubing up to 25 ft (7.6 m) maximum, including nasal cannula, may be used.
Cannula tubing must be non-kinking, which can be used for a total length of up to 25 ft (7.6 m)
maximum.Ensure the cannula is fully inserted and secure. This ensures that the Oxygen Concentrator can
properly detect inspiration for oxygen delivery. During inhalation, you should hear or feel oxygen flow to the
prongs of the nasal cannula.
NOTE
Always follow the cannula manufacturer's instructions for proper use. Replace the disposable cannula as
recommended by the cannula manufacturer or your Equipment Provider. Additional supplies are available
from your Equipment Provider.
MN131-1 rev C
Figure 9: Connecting Cannula to FreeStyle's Oxygen Outlet
EN-15