Publicité
Les langues disponibles
Les langues disponibles
Continuous follower
Tab. 2 :
Unlock from the outside
or inside using panic
function E
Split follower
Tab. 3 :
Unlock from the outside
or inside using panic
function B
EN
44
Product variants
mFlipLock standard with panic function E
The mFlipLock standard is equipped with a continuous follower so that the inside and outside handles are
always coupled. Typically, a fitting with a knob is fitted on the outside (in the opposite direction to the
escape direction) and an escape route door fitting is fitted on the inside (in the escape direction).
Tab. 2 shows the unlocking options.
Unlocking from the outside
With a key
mFlipLock standard with panic function B
The mFlipLock standard is equipped with a split follower so that the inside handle is coupled and the
outside handle is decoupled. Typically, a fitting with a lever handle is fitted on both sides of the door, with
an escape route door fitting on the inside (in the escape direction).
Tab. 3 shows the unlocking options.
Unlocking from the outside
With a key
The lock is initially retracted to 5 mm when unlocking from the outside. The flip latches are subsequently
released via the door handle and the door is completely unlocked.
Unlocking from the inside
With a key
With the door handle (panic fitting)
Unlocking from the inside
With a key
With the door handle (panic fitting)
Functions and operation
Publicité
