Hisense HS214 Manuel De L'utilisateur page 10

Connect to COAXIAL Socket
• You can use a COAXIAL cable (not included)
to connect the TV's COAXIAL OUT socket
and the COAXIAL socket on the unit.
Tip:
While in OPTIC AL , HDMI ARC or
•
COAXIAL mode, if there's no sound output
from the unit, you may need to activate
PCM signal output on your source device
(eg. TV, DVD or Blu-ray player).
Connect to HDMI ARC Socket
Your Soundbar supports HDMI with Audio
Return Channel (ARC). If your TV is HDMI ARC
compliant, you can hear the TV audio through
your Soundbar by using a single HDMI cable.
1 Use a High Speed HDMI cable to connect
the HDMI ARC connector on your Soundbar
and the HDMI ARC connector on the TV.
- The HDMI ARC connector on the TV might
be labelled di erently. For details, see the
TV user manual.
2 On your TV, turn on HDMI-CEC operations.
For details, see the TV user manual.
Tips:
- Your TV must support the HDMI-CEC and
ARC function. HDMI-CEC and ARC must be
set to On.
- The setting method of HDMI-CEC and
ARC may di er depending on the TV. For
details about ARC function, please refer to
your TV user manual.
- Only HDMI 1.4 compatible cables can
support the ARC function.
Connect to AUX Socket
A Use a RCA to 3.5mm audio cable (not
included) to connect the TV's audio output
socket and the AUX socket on the unit.
B Use a 3.5mm to 3.5mm audio cable (not
included) to connect the TV's or external
audio device Aux socket to the Aux socket
on the unit.
Connections
9
A B
AUX
EN