Installation Site; Maintenance Space - S&P UTBS Serie Manuel D'installation

6.3. INsTallaTION sITE

• Avoid installing the unit in areas near heat sources or in damp areas where the unit might
come in contact with water.
• It is recommended that the unit be installed in a place that is easily accessible for the insta-
llation. Provide sufficient room for maintenance, connection and drainage of condensate.

6.4. MaINTENaNCE sPaCE

• The installer should leave sufficient unobstructed space to allow free access to the unit for
maintenance. The amount of space needed will depend on which side of the unit is perfor-
ming the extraction. The unit is equipped with some side access doors for access to the
filters and fans. To remove the coils, the side panel must be removed. Both the filters and
the fans can be removed from either side of the unit.
Model
UTBS-2
UTBS-3
UTBS-5
UTBS-8
A (mm)
750
1100
1500
1900
39
B (mm)
360
410
410
500