Publicité
Belt Adjustment
(1) Running belt deviate to left
Start the machine by speed at 1-1.5 mi/h without loading, use die nut to make the screw turn
90 degrees (see fig1). Then let the machine run without loading 1-2 minutes. Please adjust like
this to make the belt till to mid place.
(2) Running belt deviate to right
Start the machine by speed at 1-1.5 mi/h without loading, use die nut to make the screw go
90 degrees (see fig2). Then let the machine run without loading 1-2 minutes. Please adjust like
this to make the belt till to mid place.
14
Publicité
