Honda FJ500 Manuel De L'utilisateur page 61

Tine installation:
Install the tines properly.
Incorrect arrangement of the tines or installing the tines in the wrong direction
will cause vibration and hinder proper tilling.
Two types of tines (G and H) are provided. Tine G has engraved "G" mark on its
face and tine H has "H" mark.
• Right side:
Install the right side outer rotary tines and inner rotary tines with the "G" and
"H" mark facing toward the gear case.
(The "G" and "H" mark will be invisible from outside.)
The tine "H" mark should align with the rotary pin holes.
ROTARY PIN HOLES
• Left side:
Install the left side outer rotary tines and inner rotary tines with the "G" and
"H" mark facing toward the side disk.
The tine "G" mark should align with the rotary pin holes.
58
TINE G
"G" MARK
TINE G
TINE H
"H" MARK
TINE H
ROTARY PIN HOLES