8.4 Turning the sunshade in the parasol base or bottom pole
Caution: Danger of accident!
• Get help from a second person when turning the sunshade.
• Only turn the sunshade when it is closed.
Close the canopy (see chapter 8.3).
Loosen the union nut on the stand tube
mounting until the sunshade can be turned
(approx. 2 turns).
Lift the sunshade up approx. 5 cm (1.7´´)
(Floor sleeve disengages out of stand tube
seat).
Turn the sunshade into the required position.
Press the sunshade back into the stand
tube seat until it engages.
Turn the sunshade backwards and forwards
until the floor sleeve engages in the stand
tube seat (centred).
Note
If the floor sleeve has engaged
correctly, the sunshade can no
longer be turned.
Clamp the sunshade by tightening the union
nut in the stand tube seat.
Issue: 20.02.2006
loosen
Union nut
tighten
O
PERATION
raise
turning
push and
engage
Stand tube seat
Page 13