Hook the sunshade guyrope into the eye in
the block.
Secure the sunshade by tensioning both
guyropes evenly.
8.2 Adjusting the sunshade inclination
Loosen the block locking screw.
Push the sunshade sliding tube to the
required position and secure by tightening
the locking screw.
8.3 Closing the sunshade
Caution: Danger of accident!
• Before opening or closing the sunshade ensure that no
persons or objects are under the sunshade.
Note
To avoid water stains you should only close the sunshade
in a dry condition.
• If the sunshade is closed when wet, open it as soon as
possible and let it dry out.
Loosen the block locking screw.
Push the sunshade sliding tube to the upper
stop and secure by tightening the locking
screw.
Issue: 20.02.2006
4. tension
guyrope
3. hook
guyrope in
tighten
loosen
Locking screw
tighten
loosen
O
PERATION
Sliding
tube
adjusting
the
inclination
Sliding tube
push
Block
Page 11