Midland NAUTICO 1 Manuel Du Propriétaire page 11

Model NT1 Series
®
ROGER BEEP (end of transmission) TONE
When the PTT button is released, the radio will beep to confirm to
other users that your transmission has finished. To turn the ROGER
BEEP tone on, press the MENU button until the display shows an "rb"
icon while on the right of the "rb" display, an "oF" icon appears. Select
/
"on" by pressing the buttons and push the PTT key, or press
MENU to move to the next feature setting.
To turn the ROGER BEEP tone off, press the MENU button until the
display shows an "rb" icon while on the right of the "rb" display, an
/
"on" icon appears. Select "oF" by pressing the buttons and push
the PTT key, or press MENU to move to the next feature setting.
USA/CAN/INT CHANNEL SELECTION
The NAUTICO1 channel selection can be changed to follow rules of
USA, Canada, or international rules. Press the MENU button until the
current channel icon (USA, CAN, INT) flashes. Select a different
/
channel list by pressing the buttons until the desired icon appears.
Press the PTT key or press MENU to confirm
CALL TONE SELECTION
Your NAUTICO1 has 3 user-selectable CALL TONES. To select,
press the MENU button six times, so a "CA" icon appears and to the
right of the "CA" icon the current CALL TONE setting is displayed.
/
Then press the buttons to make the CALL TONE selections, the
radio will emit a corresponding tone for each selection. To confirm,
press the PTT button or press MENU to move to the next feature
setting.
WEATHER (WX) BAND RECEIVER
Your NAUTICO1 has a WEATHER (WX) BAND RECEIVER function,
to enable user to receive weather alert/reports from designated NOAA
stations. To turn the WEATHER (WX) RECEIVER on, press and hold
the MENU button for 3 seconds. The current WX CHANNEL and WX
BAND icon will appear on the display. Press the MENU button and the
/
buttons to select one of the 10 WX BAND channels. To confirm,
press the PTT button or press MENU to move to the next feature
setting.
To turn the WEATHER (WX) RECEIVER off, press and hold the
MENU button for 3 seconds. The current radio setting will be displayed
and the WX BAND icon will go off.
Page 11 www.midlandradio.com