Cleaning And Maintenance; Storage - Klarstein Baristomat Mode D'emploi

CLEANING AND MAINTENANCE

Cleaning the device ensures a long life to the device.
Cleaning the milk system regularly prevents from harm to your health by food
intoxication.
Turn the device OFF and disconnect the power cord from the wall outlet to prevent from
damage to the device and harm to you.
Let the device completely cool off.
CAUTION: Make sure the device is completely cooled off before cleaning
to avoid damage to the device and burns to you. The device is hot during
operation and retains heat for a while after operation.
Gently remove the drip plate and tray and the milk system from the device.
To remove the milk system:
1 Remove the milk spout.
2 Press the release button and gently pull out the milk tank.
3 Lift the upper part of the milk tank.
4 Remove the milk tube from the upper part.
5 Steep the drip plate and tray, the milk spout, the milk tube, the upper and lower
part of the milk tank in lukewarm water to macerate the residue.
6 Pour out the residue from the components into the sink.
7 Thoroughly clean the components of the milk system with hot water, a food safe
detergent and a soft non-abrasive sponge.
Leave the plate, the tray and the components of the milk system to dry thouroughly.
Clean the outside of the device with a damp cloth, warm water and a drop of food safe
detergent and dry it with a cloth.
Re-assemble he components and re-attach them to the device.

STORAGE

Before storage, turn OFF the device and disconnect it from the power supply.
Clean it, if necessary.
Store the device in a clean, dry and cool environment.
EN
35