Dyna-Glo DGU732SDE Mode D'emploi page 11

ASSEMBLY INSTRUCTIONS
Remove the lower door assembly (D) from the
3.
smoker cabinet assembly (A).
Remove the 4 pre-assembled M4 x 35 mm screws
4.
(BB) from the door handle (E). Insert the 4 screws
into the lower door assembly (D), and into the
threaded holes in the door handle (E). Tighten
the screws.
Hardware Used
M4 x 35 mm
BB
Screw
4
x 4
11
3
A
D
BB
D
E