Télécharger Imprimer la page

Gima HTD8816C Mode D'emploi page 27

Thermomètre à infrarouges sans contact

Publicité

Les langues disponibles

Les langues disponibles

27
4. Replacing the Battery
1. Open and release battery cover following indicator on the surface of battery cover.
Before changing the battery be sure the system is already power off.
2. Remove the battery and replace with 2 new one, type AAA, Make sure align prop-
erly as indicated inside the battery cover.
3. Slide the battery cover back in until it snaps in place.
4. Do not dispose of used batteries in household waste. Take them to special local
collection sites.
5. In case, if system is latched up after changing battery. You may not follow up the
process of rule one. Just take off battery, waiting 30 sec, then load battery again.
Warning
Do not recharge, disassemble or dispose of in fire.
1. The typical service life of the new and unused batteries is 2000 measurements for
the operation time is 18s.
2. Only use the recommended batteries, do not recharge non-rechargeable batteries
and do not burn them.
3. Remove the batteries if the thermometer is not to be used for a long period.
5. Cleaning, Care and Storage
• The lens is very delicate.
• It is very important to protect the lens from dirt and damage.
• Use a clean, soft cloth to clean the surface of the device and LCD. Do not use
solvents or immerse the device into water or other liquids.
• Always keep the thermometer a within the storage temperature and humidity range
as specified.
• It is recommended to store the thermometer in a dry location free from dust.
It is recommended to store the thermometer in a dry location free from dust. Do not
expose the thermometer to direct sunlight, high temperature/ humidity or any extreme
environment, otherwise the function will be reduced.
When the ambient temperature of the thermometer changes too much, such as mov-
ing the thermometer from one place of lower temperature to another place of higher
1) Power is off.
2) Improper battery installation.
3) The battery is exhausted.
4) Display remains blank.
ENGLISH
1) Press ON button again.
2) Check the battery polarity.
3) Replace with a new battery.
4) Contact the retailer or service
center.

Publicité

loading

Ce manuel est également adapté pour:

25583