Stanley-Bostitch Super Pro 6 Mode D'emploi

Electric Pencil Sharpener
Model: EPS10HC/EPS12HC
Operating Instructions
Congratulations on your purchase of this premium quality BOSTITCH Electric Pencil
Sharpener. With proper use and care, this sharpener will serve you well for many years.
Important:
Please read these instructions completely and carefully before operating your new electric sharpener. Keep this instruction sheet for future reference.
Features:
EPS10HC
Quiet Sharp 6™ Classroom Pencil Sharpener
• Sharpens multiple pencil sizes
• Unique angled cutters for controlled sharpening
• Tip Saver Technology to prevent over sharpening
• High capacity easy clean shavings receptacle
• Safety shut-off feature prohibits operation when blades are exposed
• Quiet heavy duty long life motor with thermal protection for added safety
• Extra long 6 foot power cord
Caution:
1. Only plug sharpener into a standard 120 V AC outlet located near and easily accessible to the unit.
2. This unit must be unplugged to disable power in case of a malfunction.
3. To extend the life of the motor, remove the pencil from the sharpener opening once point is sharpened.
4. Refrain from inserting hard materials such as pens, mechanical pencils, chalk, crayons or soft coloring
pencils which will damage or clog the cutter blades.
5. In the event the motor should overheat, a safety device (thermal switch) will activate to protect the
motor from damage. If the thermal switch is activated, allow the sharpener to cool for approximately
20 to 30 minutes to reset automatically.
6. An integral safety device prevents operation unless the shaving receptacle is firmly in place.
7. Unplug the sharpener before cleaning with damped cloth and mild soap solution.
How to Use:
1. Insert the AC plug into any standard 120 V AC outlet.
2. Rotate the pencil size selector dial to the correct pencil size. The size for a standard no. 2 pencil
is marked with an "S" on the EPS10HC and a on the EPS12HC.
3. Insert the pencil into the pencil sharpener opening to sharpen.
4. At the end of the sharpening cycle, the Tip Saver Technology™ feature will indicate the pencil is
sharpened by a change in motor sound and a decrease in resistance. No additional force should
be applied to the pencil.
5. Pull out pencil at the end of the sharpening cycle.
6. For trouble-free operation, empty the shavings receptacle frequently.
Note: Pencils with un-centered lead will not sharpen evenly.
Specifications:
Model Power Source Current Dimensions (W x L x H)
EPS10HC 1.9A
4-1/3 x 8-1/2 x 6-13/16
AC120 V, 60Hz
(110 x 215 x 173mm)
EPS12HC 2.1A
167153REVA 02/05
EPS12HC
Pro Sharp 6™ Commercial Pencil Sharpener
• Sharpens multiple pencil sizes
• Unique angled cutters for controlled sharpening
• Dual helical cutter
• Tip Saver Technology to prevent over sharpening
• High capacity easy clean shavings receptacle
• Safety shut-off feature prohibits operation when blades are exposed
• Industrial fan cooled motor with thermal protection for long life
• Extra long 6 foot power cord
Three Year Limited Warranty
Stanley Fastening Systems, L.P. warrants this
product to the original purchaser for three
years from the date of purchase against any
defect in material or workmanship, and agrees
to repair or replace, at Stanley Fastening
Systems, L.P.'s option, any defect of that
material or workmanship. This warranty is not
transferable. It only covers damage resulting
from defects in material and workmanship,
and it does not cover conditions or
malfunctions resulting from normal wear,
neglect, abuse, accident or repairs made by
other than our regional repair center or
authorized warranty service centers. Driver
blades, bumpers, and o-rings are considered
normally wearing parts.
THIS WARRANTY IS IN LIEU OF ALL OTHER
EXPRESS OR IMPLIED WARRANTIES.
REPAIR OR REPLACEMENT AS PROVIDED
UNDER THIS WARRANTY IS THE EXCLUSIVE
REMEDY OF THE CONSUMER.
FASTENING SYSTEMS, L.P. SHALL NOT BE
HELD LIABLE FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES FOR BREACH
OF ANY WARRANTY ON THESE PRODUCTS.
This warranty is limited to sales in the United
States and Canada. Some states do not allow
limitations on how long an implied warranty
lasts, or the exclusion or limitation of
Weight
incidental or consequential damages, so the
above limitations or exclusions may not apply
3.3 lbs (1.5 kg)
to you. This warranty gives you specific legal
4.2 lbs (1.9 kg)
rights, and you may also have other rights
which vary from state to state.
To obtain warranty service, return the
product at your expense together with
proof of purchase to a Stanley-Bostitch
Regional or Authorized Warranty Repair
Center. You may call us at 1-800-556-6696
for the location of authorized warranty
service centers in your area.
STANLEY